Motul 7100 10w30

19.9567.95

Application: Engine lubricants
Engine Type: 4-Stroke
Quality: 100% Synthetic
Product Range: Motorcycle
Viscosity: 10W30
API Standards: API SG/SH/SJ/SL/SM/SN
JASO Standards: JASO MA2 M033MOT116

100% Synthetic 4-Stroke lubricant – Ester technology – Meets bike manufacturer specifications, especially HONDA which recommends SAE 10W30 for fuel economy improvement. Smooth shifting. Improved shear resistance. Meets JASO MA2 specifications for optimal wet clutch performance. Suitable for catalytic converters.

SKU: N/A Category:

Description

TYPE OF USE

High performance bikes, sports bikes, street & road bikes, trails, off road bikes, enduro, trial…fitted with

4 stroke engines, integrated gearbox or not, wet or dry clutch, engines meeting Euro 2 or Euro 3

emission regulation, fitted with exhaust gas after treatment systems : catalytic converters, air injection

into exhaust pipe…

Recommended for specific HONDA, YAMAHA engines requiring SAE 10W-30 viscosity grade oil.

Other uses: street bikes without catalytic converters, scooters, ATV’s, UTV’s…

PERFORMANCE

STANDARDS API SN / SM / SL / SJ / SH / SG

SPECIFICATION JASO MA2 under N° M033MOT116

Protection

Ester Technology:

– Low traction coefficient Ester to minimize engine internal friction losses and improve

performance

– Synergy of Ester with anti-wear additives and improved shear resistance for improved gear

protection and life time.

100% Synthetic lubricant for improved oil film resistance at high temperatures and high revs.

Optimized Phosphorus and Sulphur content (JASO MA2 < 1200 ppm) for better operating conditions of

catalytic converters.

The innovative anti-wear additives package provides outstanding gearbox protection. FZG Gear Test

results: Pass FLS>14. The FZG (Forschungsstelle für Zahnrader und Getriebebau) Test, evaluates

fluid lubricating and wear protection properties at the interface of a loaded set of gears. Lubricants are

then graded based on their “Failure Load Stage” or FLS rating from FLS 1 (very poor result) up to FLS

14 (outstanding result).

Comfort

JASO has created its own 4-stroke motorcycle standard -JASO T903- which has three grades MA, MA1

and MA2.

JASO MA2 offers the most efficient friction levels to guarantee the clutch engagement during the three

riding modes: Starting, Acceleration and Constant Speed.

RECOMMENDATIONS

Drain interval: according to manufacturers’ recommendations and tune to your own use.

Can be mixed with synthetic or mineral lubricants.

PROPERTIES

Color Visual Red

Viscosity grade SAE J 300 10W-30

Density at 20°C (68°F) ASTM D1298 0.859

Viscosity at 40°C (104°F) ASTM D445 73.7 mm²/s

Viscosity at 100°C (212°F) ASTM D445 11.4 mm²/s

Viscosity Index ASTM D2270 147

Pour point ASTM D97 -33°C / -27.4°F

Flash point ASTM D92 228°C / 442.4°F

TBN ASTM D2896 8.4 mg KOH/g

Additional information

Amount

1L, 4L