Motul 5100 10W30

18.9552.95

Application: Engine lubricants
Engine Type: 4-Stroke
Quality: Technosynthese
Product Range: Motorcycle
Viscosity: 10W30
API Standards: API SG/SH/SJ/SL/SM
JASO Standards: JASO MA2 M033MOT111

Technosynthese® 4-Stroke lubricant – Ester technology – Meets bike manufacturer specifications, especially HONDA which recommends SAE 10W30 for fuel economy improvement. Smooth shifting. Improved shear resistance. Meets JASO MA2 specifications for optimal wet clutch performance. Suitable for catalytic converters

SKU: N/A Categories: ,

Description

TYPE OF USE

Street & road bikes, trails, off road bikes, enduro, trial…fitted with 4 stroke engines, integrated gearbox

or not, wet or dry clutch, engines designed to run a low viscosity lubricant, engines meeting Euro 2 or

Euro 3 emission regulation, fitted with exhaust gas after treatment systems : catalytic converters, air

injection into exhaust pipe…

Recommended for specific HONDA, YAMAHA engines requiring SAE 10W-30 viscosity grade oil.

Other uses: street bikes without catalytic converters, scooters, ATV’s, UTV’s….

PERFORMANCE

STANDARDS API SM / SL / SJ / SH / SG

SPECIFICATION JASO MA2 under N° M033MOT111

Protection

Technosynthese® lubricant reinforced by Ester base stock to warranty anti-wear properties and improve

gear protection and life time.

Improved oil film resistance at high temperatures for engine durability.

Optimized Phosphorus and Sulphur content (JASO MA2 < 1200 ppm) for better operating conditions of

catalytic converters.

The innovative anti wear additives package provides excellent gearbox protection. FZG Gear Test

results: Pass FLS 14. The FZG (Forschungsstelle für Zahnrader und Getriebebau) Test, evaluates fluid

lubricating and wear protection properties at the interface of a loaded set of gears.

Comfort

JASO has created its own 4-stroke motorcycle standard -JASO T903- which has three grades MA, MA1

and MA2.

JASO MA2 offers the most efficient friction levels to guarantee the clutch engagement during the three

riding modes: Starting, Acceleration and Constant Speed.

RECOMMENDATIONS

Drain interval : according to manufacturers’ recommendations and tune to your own use.

Can be mixed with synthetic or mineral lubricants.

PROPERTIES

Colour Visual Green

Viscosity grade SAE J 300 10W-30

Density at 20°C (68°F) ASTM D1298 0.871

Viscosity at 40°C (104°F) ASTM D445 74.6 mm²/s

Viscosity at 100°C (212°F) ASTM D445 11.5 mm²/s

Viscosity Index ASTM D2270 147

Pour point ASTM D97 -36°C / -32.8°F

Flash point ASTM D92 226°C / 438°F

TBN ASTM D2896 7.5 mg KOH/g

 

Additional information

Amount

1L, 4L