TYPE OF USE
Street & road bikes, trails, off road bikes, enduro, trial…fitted with 4 stroke engines, integrated gearbox
or not, wet or dry clutch, engines meeting Euro 2 or Euro 3 emission regulation, fitted with exhaust gas
after treatment systems : catalytic converters, air injection into exhaust pipe…
Suitable for specific KTM, HUQSVARNA engines requiring SAE 10W-50 viscosity grade oil.
Other uses: street bikes without catalytic converters, scooters, ATV’s, UTV’s…
STANDARDS API SM / SL / SJ / SH / SG
SPECIFICATION JASO MA2 under N° M033MOT113
Technosynthese® lubricant reinforced by Ester base stock to warranty anti-wear properties and improve
gear protection and life time.
Improved oil film resistance at high temperatures for engine durability.
Grade 10W at cold temperature for a better anti wear protection of engine at cranking.
Grade 50 at hot temperature, specially designed for big bore engines, thumpers, twins, multicylinders…
Low Phosphorus and Sulphur content for better operating conditions of catalytic converters required for
latest emission regulation.
The innovative anti wear additives package provides excellent gearbox protection. FZG Gear Test
results: Pass FLS 14. The FZG (Forschungsstelle für Zahnrader und Getriebebau) Test, evaluates fluid
lubricating and wear protection properties at the interface of a loaded set of gears.
JASO has created its own 4-stroke motorcycle standard -JASO T903- which has three grades MA, MA1
JASO MA2 offers the most efficient friction levels to guarantee the clutch engagement during the three
riding modes: Starting, Acceleration and Constant Speed.
Drain interval: according to manufacturers’ recommendations and tune to your own use.
Can be mixed with synthetic or mineral lubricants.
Colour Visual Green
Viscosity grade SAE J 300 10W-50
Density at 20°C (68°F) ASTM D1298 0.873
Viscosity at 40°C (104°F) ASTM D445 118.3 mm²/s
Viscosity at 100°C (212°F) ASTM D445 17.73 mm²/s
Viscosity Index ASTM D2270 168
Pour point ASTM D97 -39°C / -38°F
Flash point ASTM D92 218°C / 424°F
TBN ASTM D2896 8.2 mg KOH/g