TYPE OF USE
Street & road bikes, trails, off road bikes, enduro, trial…fitted with 4 stroke engines, integrated gearbox
or not, wet or dry clutch, engines designed to run a low viscosity lubricant, engines meeting Euro 2 or
Euro 3 emission regulation, fitted with exhaust gas after treatment systems : catalytic converters, air
injection into exhaust pipe…
Recommended for specific HONDA, YAMAHA engines requiring SAE 10W-30 viscosity grade oil.
Other uses: street bikes without catalytic converters, scooters, ATV’s, UTV’s….
STANDARDS API SM / SL / SJ / SH / SG
SPECIFICATION JASO MA2 under N° M033MOT111
Technosynthese® lubricant reinforced by Ester base stock to warranty anti-wear properties and improve
gear protection and life time.
Improved oil film resistance at high temperatures for engine durability.
Optimized Phosphorus and Sulphur content (JASO MA2 < 1200 ppm) for better operating conditions of
The innovative anti wear additives package provides excellent gearbox protection. FZG Gear Test
results: Pass FLS 14. The FZG (Forschungsstelle für Zahnrader und Getriebebau) Test, evaluates fluid
lubricating and wear protection properties at the interface of a loaded set of gears.
JASO has created its own 4-stroke motorcycle standard -JASO T903- which has three grades MA, MA1
JASO MA2 offers the most efficient friction levels to guarantee the clutch engagement during the three
riding modes: Starting, Acceleration and Constant Speed.
Drain interval : according to manufacturers’ recommendations and tune to your own use.
Can be mixed with synthetic or mineral lubricants.
Colour Visual Green
Viscosity grade SAE J 300 10W-30
Density at 20°C (68°F) ASTM D1298 0.871
Viscosity at 40°C (104°F) ASTM D445 74.6 mm²/s
Viscosity at 100°C (212°F) ASTM D445 11.5 mm²/s
Viscosity Index ASTM D2270 147
Pour point ASTM D97 -36°C / -32.8°F
Flash point ASTM D92 226°C / 438°F
TBN ASTM D2896 7.5 mg KOH/g